Plant Library

Transport Clearance Calculator

Check if your equipment requires oversize or overmass permits for road transport in Australia. Enter dimensions to see permit requirements and transport considerations.

Select plant

Search the Plant Library, or switch to your fleet to auto-fill transport dimensions from linked models.

Selected model: Isuzu MU-X LS-T 4x4
Opened from linked model
Missing

Type at least 2 characters to search the Plant Library.

Equipment Dimensions

Selected plant: Isuzu MU-X LS-T 4x4
Transport data: Missing

Opened from linked model

Standard limit: 2.5m

Standard limit: 4.3m

Standard limit: 19.0m (with trailer)

Standard limit: 42.5t

Australian Road Transport Limits & permit path

Standard Limits (No Permit)

  • Width2.5 m
  • Height4.3 m
  • Length (single vehicle)12.5 m
  • Length (with trailer)19.0 m
  • Gross Mass42.5 t

Over-Dimensional Thresholds

  • Class 1 OSOMPermit required
  • Width > 3.5mEscort required
  • Width > 5.0mPolice escort
  • Height > 4.6mRoute survey

When the result says “permit required”

  1. Check whether a national or state notice already covers the route and combination.
  2. If not covered, apply for a Class 1 OSOM permit through NHVR Go.
  3. For Northern Territory or Western Australia trips, apply directly to the relevant authority.

Have this ready before you apply

  • Loaded dimensions and gross mass
  • Vehicle / trailer combination details
  • Axle masses and spacings if relevant
  • Intended route and site access points
  • Confirmation the load is a large indivisible item
  • Any third-party approvals or supporting notes

Disclaimer: This calculator provides general guidance only. Actual permit requirements vary by state, route, and load configuration. Always verify with the relevant state transport authority before transport.

NHVR OSOM guidance|Do I need a permit?|Notices & permit-based schemes